Jsme tu pro Vás
Nevíte si s něčím rady?
Neváhejte nás kontaktovat.
ABELman
Moje ABEL podpora
HPE FlexNetwork 5140 48G PoE+ 4SFP+ HI Switch R9L64A RENEW
Parametry
HPE FlexNetwork 5140 48G PoE+ 4SFP+ HI Switch R9L64A RENEW
I/O ports and slots |
48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+) |
||
4 SFP+ 10GbE ports 1 port expansion module slot |
|||
Additional ports and slots |
1 dual-personality (RJ-45 or mini-USB) serial console port 1 RJ-45 out-of-band management port 1 USB 2.0 |
||
Power supplies |
2 power supply slots 1 minimum power supply required |
||
Fan tray |
Airflow direction is from side to back |
||
Physical characteristics |
Dimensions |
17.32(w) x 18.11(d) x 1.71(h) in. (44.00 x 46.00 x 4.36 cm) (1U height) |
|
Weight |
≤9.6 kg |
||
Memory and processor |
2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash |
||
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardwareincluded) |
||
Performance |
1000 Mb Latency |
< 5 µs |
|
10 Gbps Latency |
< 3 µs |
||
Throughput |
180 Mpps |
||
Routing/Switching capacity |
336 Gbps |
||
Routing table size |
8K |
||
MAC address table size |
32K |
||
Environment |
Operating temperature |
23°F to 113°F (-5°C to 45°C) |
|
Operating relative humidity |
5% to 95%, noncondensing |
||
Non-operating/Storage temperature |
-40°F to 158°F (-40°C to 70°C) |
||
Non-operating/Storage relative humidity |
5% to 95%, noncondensing |
||
Acoustic |
Low-speed fan: 57.2 dB, High-speed fan: 68.9 dB; ISO 7779 |
||
Electrical characteristics |
Frequency |
50/60 Hz |
|
Maximum heat dissipation |
ranges from 112 BTU/hr to 5943 BTU/hr depending on power supply configuration |
||
Voltage |
100-240 VAC, rated (90-264 VAC, max)-48 to -60 VDC, rated (-36 to -72 VDC, max) (depending on power supply chosen) |
||
Maximum power rating |
1742 W (dual AC) |
||
Idle power |
40 W (dual AC) |
||
PoE power |
1440W (30W max PoE power per port) |
||
Notes: |
- Idle power is the actual power consumption of the device with no ports connected. - Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated - PoE+ power range is from 360W to 1440W. PoE+ power is the power supplied by the internal power supplies. It is dependent on the type and quantity of power supplies. Device supports 1 or 2 internal modular power supplies. |
||
Safety |
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; RoHS Compliance; AS/NZS 60950-1; GB 4943; EAC (EurAsian Conformity Certification) |
||
Emissions |
ETSI EN300 386 V1.6.1 (2012-09); ETSI EN 300 386 V2.1.1 (2016-07); EN 55032:2015 CLASS A; CISPR 32:2015 CLASS A; AS/NZS CISPR 32:2015 CLASS A; EN 61000-3-2:2014; EN 61000-3-3:2013; FCC PART15 Subpart B CLASS A; ICES-003 Issue 7 CLASS A; ANSI C63.4-2014; VCCI-CISPR 32:2016 CLASS A |
||
Generic |
IEC 61000-4-1:2006; IEC 61000-4-2:Ed2 2008; IEC 61000-4-3:2020; IEC 61000-4-3:2010; IEC 61000-4-4:2004; IEC 61000-4-4:2011; IEC 61000-4-4:Ed3.0 2012; IEC 61000-4-5:2014; IEC 61000-4-5:2017; IEC 61000-4-6:2013; IEC 61000-4-6:2013 COR1:2015; IEC 61000-4-8:2009; IEC 61000-4-11:2004; IEC 61000-4-11:2017; IEC 61000-4-11:2020 |
||
ESD |
Air 8KV; Con 6KV; Criteria B |
||
Immunity |
ETSI EN300 386 V1.6.1 (2012-09); ETSI EN 300 386 V2.1.1 (2016-07); EN 55035:2017; CISPR 35:2016; |
||
Management |
IMC-Intelligent Management Center; Smart MC, command-line interface; SNMP Manager |
||
Services |
Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. |